Mylex AcceleRAID 250 Informations techniques télécharger pdf (Page 107)

Drive Configuration

Manual No. 775029 2-65

☞ If you wish to change any settings, use the arrow key to select

the desired definition field and change its value as described

earlier.

☞ To add the logical drive, press the Tab key to switch focus to

the Add Drive button, then press Enter with Add Drive selected.

The logical drive is added to the display box, and focus returns to the logical

drive definition field line if capacity remains for additional logical drives.

☞ To define additional logical drives, use the arrow key if

necessary to return to the RAID Level definition field. Repeat the

steps described in “Define Logical Drives” above.

As long as you haven’t applied the configuration to the controller, you can

delete the logical drives you’ve set up and define new ones. RAID EzAssist

lets you:

• Delete the most recent logical drive you’ve added, OR

• Delete all the logical drives you’ve added in this logical drive definition

session.

☞ To delete the most recently-added logical drive, press Tab if

necessary to switch focus to the buttons, use the arrow key to

select Delete Last, then press Enter.

☞ To delete all logical drives that you added in this session,

press Tab if necessary to switch focus to the buttons, use the

arrow key to select Clear New, then press Enter.

☞ If you wish, define new logical drives, as described in “Define

Logical Drives” above.

❑ Apply the Configuration to the Controller.

In order for the disk arrays and logical drives you set up to become a valid,

registered configuration, you must Apply the configuration to the controller.

☞ To apply the configuration, press Tab if necessary to switch

focus to the buttons, use the arrow key to select Apply, then

press Enter,

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 249 250

Pas de commentaire

Mylex AcceleRAID 250 Informations techniques Page 107